Product Overview
Ceramic Hose is a heavy-duty industrial hose developed for conveying highly abrasive materials in mining, dredging, mineral processing, and other demanding industrial environments. It combines the flexibility of reinforced rubber with the wear resistance of ceramic materials, providing a reliable solution for pipelines exposed to continuous friction from solid particles. The product is particularly suitable for applications where conventional rubber hoses experience rapid internal deterioration and rigid ceramic pipes cannot accommodate equipment movement or complex installation arrangements.
The hose typically features an internal lining made from high-alumina ceramic tiles or ceramic segments, supported by a specially formulated rubber layer. The ceramic lining provides a hard protective surface against abrasive particles, while the rubber structure contributes flexibility, impact absorption, and structural support. Textile reinforcement or high-strength steel wire can be incorporated according to the required working pressure and operating conditions. The outer rubber cover protects the reinforcement structure against external abrasion, moisture, and environmental exposure.
Ceramic Hose is available in different internal diameters, lengths, pressure ratings, and connection configurations. Depending on the application, the product can be designed for slurry suction, material discharge, pump connections, and industrial transfer pipelines. Special flange arrangements and customized dimensions can also be considered to match existing equipment and pipeline systems.
One of its important advantages is the combination of internal wear protection and external flexibility. In industrial facilities, pipelines are often affected by pump vibration, equipment movement, installation limitations, and changing operating conditions. Ceramic Hose helps accommodate these requirements while maintaining a protective internal lining. Its application can reduce premature hose replacement, improve material transfer continuity, and support more predictable maintenance planning.
Case Study: Coal Ash Slurry Transfer at a Coastal Power Facility
A coastal power generation facility required a more durable hose solution for transferring coal ash slurry from a storage area to a wastewater treatment system. The facility operated several high-capacity transfer pumps and used flexible hoses to connect temporary pipeline sections during maintenance and material handling operations.
The project involved a 65,000 DWT bulk carrier delivering coal for the power station. After unloading, coal combustion by-products were transferred through an industrial slurry system. The existing rubber hoses suffered from internal erosion caused by fine ash particles mixed with coarse residual materials. Wear became particularly noticeable around the pump discharge connections, where flow turbulence and pressure fluctuations increased the deterioration rate.
Hongruntong Marine supplied customized Ceramic Hoses with an abrasion-resistant ceramic lining and reinforced rubber construction. The hose dimensions and flange arrangements were selected to match the facility's existing connections. The reinforcement structure was designed according to the specified operating pressure, while the flexible body allowed convenient installation around the pump station.
Following installation, the ceramic lining provided additional protection against continuous particle abrasion. The maintenance team found the new hose configuration suitable for the facility's routine transfer operations. Inspection results helped the operator establish a more structured maintenance schedule and reduce unexpected replacement work.
The facility subsequently considered the same configuration for other slurry transfer sections. The project demonstrated how ceramic-lined flexible hoses can support more reliable material transportation in power generation facilities where abrasive solids are regularly handled.
Specifications
| Name |
Ceramic Hose |
| Tube |
NR, BR, SBR |
| Reinforcement |
High Tensile Steel Wire Spiral |
| Cover |
NR, CR |
| Working Pressure |
< 25 Bars |
| Flange Material |
Q235B carbon steel paint |
| Working Temperature |
-30℃ to +80℃ |
| Safety Factor |
5:1 |
| Application |
Installed between the pump and cutter of the dredger, suction the slurry. Suction hose & armored hose with HB steel ring in, suitable for limestone, granite, coral, and mineral, etc. |
| Advantages |
High abrasion resistance; light weight; oil and heat resistant; flexible, easy to bend |
Dimension & Pressure Ratings
| Inner Diameter (mm) |
Working Pressure (MPa) |
Burst Pressure (MPa) |
Length (m) |
Wall Thickness (mm) |
| 300 |
0.4–1.2 |
3.6 |
1–3 |
34–37 |
| 414 |
0.4–1.2 |
3.6 |
1–3 |
35–37 |
| 560 |
0.4–1.2 |
3.6 |
2–3 |
40–45 |
| 600 |
0.4–1.2 |
3.6 |
2–3 |
40–45 |
| 700 |
0.8–1.5 |
4.5 |
2–3 |
40–45 |
| 800 |
1.2–2.5 |
5.5 |
2–3 |
50–52 |
| 900 |
1.5–2.5 |
7.5 |
2–3 |
55–58 |
| 1000 |
2.0–2.5 |
7.5 |
3–5 |
75–78 |
Product Highlights
Advanced Ceramic Lining for Continuous Abrasive Material Transfer
The internal ceramic lining is designed to withstand demanding abrasion conditions generated by continuous solid-particle transportation. In coal ash, mineral slurry, and industrial waste transfer systems, suspended particles repeatedly contact the hose wall under hydraulic force. This process can gradually remove conventional rubber lining material and create localized areas of weakness.
High-alumina ceramic offers excellent hardness and wear resistance, making it suitable for protecting the internal surface against abrasive particles. Ceramic tiles or segments can be arranged according to the hose design, providing a protective layer in areas exposed to continuous material flow. The ceramic structure helps reduce direct abrasion of the underlying rubber and supports more stable internal dimensions during operation.
The ceramic material can also provide good resistance to erosion in suitable operating environments. However, ceramic lining design must consider particle size, flow velocity, impact angle, and material concentration. Correct engineering selection is essential to obtain the expected wear protection and avoid unsuitable operating conditions.
Optimized Rubber Bonding and Structural Integration
The connection between ceramic components and the rubber lining is an important factor influencing hose reliability. Ceramic materials are hard and wear resistant, but they are also relatively brittle compared with rubber. A suitable bonding structure is necessary to keep the ceramic elements securely positioned during transportation, installation, and operation.
The rubber layer provides an elastic supporting structure around the ceramic components. It helps accommodate vibration and minor deformation while reducing the direct transmission of mechanical impact to the ceramic lining. The bonding process must provide sufficient adhesion and consistent positioning to minimize the possibility of ceramic displacement under normal operating conditions.
The integration of ceramic and rubber materials allows the hose to combine different material characteristics within one structure. This is particularly important in applications where abrasion resistance must be balanced with flexibility and mechanical durability.
Reinforced Construction for Pressure Stability
Industrial transfer systems operate under different pressure conditions depending on pump capacity, pipeline length, material density, and system configuration. Ceramic Hose can incorporate multiple reinforcement layers to provide the required structural strength.
Synthetic textile reinforcement can improve dimensional stability and support internal pressure resistance. Steel wire reinforcement may be selected for applications requiring additional strength or specific suction performance. The reinforcement arrangement is determined according to the product specification and intended operating conditions.
The reinforced structure helps limit excessive expansion and deformation during operation. It also supports more stable connections between the hose and associated equipment. Correct pressure selection is essential because the actual working pressure must remain within the rated operating range, including consideration of transient pressure changes.
Flexible Installation and Customized Connection Design
Many industrial facilities contain complicated pipeline arrangements involving pumps, valves, storage tanks, conveyors, and processing equipment. Rigid pipes may require additional elbows, joints, and installation supports to accommodate these layouts.
Ceramic Hose provides a flexible alternative for selected pipeline sections. Its rubber body can accommodate appropriate bending and minor equipment movement, helping simplify connections and reduce installation constraints. Product dimensions, flange types, connection positions, and overall lengths can be customized according to engineering drawings.
The hose must still be installed within its specified minimum bending radius and should not be twisted or subjected to excessive tensile loads. Appropriate installation planning helps protect the ceramic lining and reinforcement structure while maintaining reliable operation.
Applications
Coal-Fired Power Plants
Ceramic Hose can be used in selected coal ash slurry transportation systems, fly ash handling equipment, and abrasive waste transfer pipelines. Its internal ceramic protection helps reduce wear caused by continuous solid-particle movement.
Mineral Processing and Tailings Transportation
In mineral processing plants, ceramic-lined hoses can transport ore slurry, tailings, concentrates, and other abrasive mixtures. They are particularly useful in pipeline sections connected to pumps and processing equipment where flexibility is required.
Industrial Wastewater and Sludge Systems
Certain industrial wastewater systems contain suspended solids, sand, and abrasive residues. Ceramic Hose can be considered for suitable transfer sections where internal wear resistance and flexible installation are important operational requirements.
Why Choose Hongruntong Marine
Extensive Manufacturing Experience in Marine and Industrial Products
Hongruntong Marine has more than 30 years of manufacturing experience, serving customers in marine engineering, industrial equipment, and related manufacturing sectors. Long-term production experience provides an understanding of the practical requirements associated with rubber products, reinforced structures, material compatibility, and industrial operating environments.
Ceramic Hose manufacturing requires particular attention to the relationship between ceramic lining, rubber compounds, reinforcement materials, and connection structures. A product may have excellent ceramic hardness but still experience performance problems if the bonding structure, rubber support, or reinforcement arrangement is unsuitable. Hongruntong Marine emphasizes the coordination of these structural elements when evaluating product specifications.
The company focuses on manufacturing consistency and application requirements rather than relying exclusively on general product descriptions. This approach helps customers obtain hose configurations that are more closely aligned with their actual working conditions.
Flexible Customization for Different Industrial Projects
Industrial hose requirements vary significantly between different facilities. A coal-fired power plant may prioritize abrasion resistance and pressure stability, while a mining operation may require a different internal diameter, flange arrangement, or reinforcement structure.
Hongruntong Marine supports customized specifications based on customer drawings, technical documents, and project requirements. Customization can cover hose diameter, length, working pressure, ceramic lining arrangement, rubber compound selection, and end connections.
For equipment replacement projects, customers can provide existing hose dimensions and connection information. This allows the product configuration to be reviewed before manufacturing. For new installations, technical parameters can be discussed to help identify a suitable structure.
This flexibility is valuable for industrial contractors and equipment distributors handling projects with non-standard dimensions or specific installation requirements.
Attention to Material Performance and Production Consistency
The service performance of Ceramic Hose depends on the quality of its individual components and the stability of the manufacturing process. Ceramic hardness, rubber elasticity, reinforcement strength, and bonding quality all contribute to the final product structure.
Hongruntong Marine pays attention to material selection and production requirements to support consistent manufacturing results. Important inspection considerations include internal diameter, overall length, flange dimensions, external appearance, ceramic arrangement, and structural integrity.
For projects with specific technical requirements, relevant inspection procedures and quality documentation can be coordinated according to the agreed specifications. This provides customers with a clearer understanding of product conformity before shipment.
International B2B Service and Project Coordination
Industrial procurement often involves several stages, including technical communication, product specification confirmation, quotation, production, inspection, packaging, and transportation. Efficient coordination between these stages is important for customers managing overseas projects and equipment supply chains.
Hongruntong Marine provides communication support throughout the ordering process. Customers can discuss product requirements, submit technical drawings, confirm connection details, and coordinate delivery arrangements before production begins.
For international distributors, contractors, and industrial equipment suppliers, clear specification confirmation helps reduce misunderstandings and improves purchasing efficiency. After delivery, technical communication can continue regarding installation, routine inspection, and product maintenance.
Frequently Asked Questions
1. What types of ceramic materials are used in Ceramic Hose?
High-alumina ceramic is commonly used because of its high hardness and excellent abrasion resistance. The ceramic grade and lining configuration can be selected according to the abrasive material and operating conditions.
2. Can Ceramic Hose handle high-pressure slurry transportation?
Yes, it can be designed for different pressure requirements using suitable reinforcement layers. The working pressure must be confirmed according to the hose construction and project specifications.
3. Does ceramic lining make the hose completely rigid?
No. The ceramic lining provides internal wear protection, while the reinforced rubber body maintains flexibility. The allowable bending radius depends on the hose diameter and construction.
4. How should Ceramic Hose be maintained?
Regularly inspect the outer cover, flange connections, leakage points, and visible structural damage. Internal inspection should also be arranged according to operating conditions and the manufacturer's recommendations.
5. Can Hongruntong Marine manufacture non-standard Ceramic Hose?
Yes. Customized diameters, lengths, pressure ratings, reinforcement structures, and flange connections can be discussed according to customer drawings and technical requirements.